After month of work, here is my galileo clock, with instructions and set up video !
Context
Building clock is one of my favorite field in lego technic, it provides many satisfaction when the clock is running smoothly for a while. That is why I have planned many year ago to build a accurate and reliable clock. after mont of work, I manage to did it and I present you today my galileo clock.
Building
This clock is a two concentrically hands clock, with a galileo escapement, a remontoir and a skeleton design. The aim was to build a accurate and efficient clock, that is why I have chosen galileo escapement. The heart of this clock is of course the gearing and the escapement. The galileo clock is composed of a pendulum with a pallet attached to it, which meet the escapement wheel. A released pawl is used to obtain the rhythm of the tic tac. This escapement system is also equipped with a knife edge suspension which enhances extremely the performance of the pendulum and consequently the clock.
The escapement is build in order to have simple set up. No need to set up the orientation of the pallet or the pawl, only the position. Therefore, there are only 4 setting : the position of the pallet, the pawl, and sliding pawl releaser, and the position of the bob to get the correct period. Note that as I use a 40-tooth gear as the escapement wheel, the period of the pendulum is consequently 1.5sec in order to have 60sec of complete rotation of the wheel. Regarding the displayed time, I used only two hands (minute and hours) concentrically because as the second hand move faster than other, it affect a lot the running a clock with a big heay hand. that is why the second hand is moved down and is smaller in order to not affect the running of the clock or the period of the pendulum. The gearing on the hands is also equipped with friction linear clutch in order to set the time easily as shown on the video.
The clock is equipped with a manual remontoir which drives a differential connected to the drum and the clock. A ratchet blocks the differential when the clock is running, and when the remontoir is activate, it enable the drum to enroll the string without stopping the clock. This is a basic solution from other clock. Note also that on the gearing, I use some u-join to avoid the problem of friction between bracing on the axle. I have also used many new part on the gearing, axle and bracing. This is the only way to have a efficient and reliable clock. Regarding the construction, I have chosen the studless building which is not also strong than the studfull but with lot of frame the rigidity is not a problem.
Regarding the performance, there are very good. The clock is easy to set, only put in on a corner (left or right) or on a center stand, and set up by following the video below. Thanks to all efficient solution (escapement, constructions, gearing), the drop rate of this clock is 60mm/hours for 650gr of weight., that is to say with a 720mm of room (on a table or shelf) it runs for 12hours. And if you build a pulley system (like on real clock), you can have 24h of autonomy but the string attached to the clock will have to be attached to a solid structure like the table of shelf, and of course the weight of 650gr must be double, if not it will strain the structure of the clock.
Pictures and Video
See it functioning :
How to build ?
📕 You only need the parts and the instructions. You can purchase the PDF instructions on the shop and build with your own parts.
🎁 If you want to purchase the LEGO parts + PDF instructions, the kit is available at Buildamoc
The instruction contains the partlist at the end, but you can check individually on Rebrickable, or in the instructions previews below.
ATTENTION : This clock is a complicated mechanism, you have to pay attention to this tips before starting building your clock or buying the building instructions :
- it is better to have already watch a mechanical clock to understand how it works.
- it is better if you have already build other big lego model with lot of gearing (in order to set the gearing correctly, not pressing the bush or gears against the bracing and so on, like 8258 or 8043 or 8880 or 8480)
- use only new parts for the gearing, axle and bracing, used parts are not good for this type of fine mechanism
- has a tiny but heavy bottle, in order that the bottle don’t touch the pendulum when it goes down. Of course you can use metal weight. Require weight is about 650gr with 50mm of maximum diameter if you want to have more than 4-6h of autonomy
- Building and make it works is a challenge, so don’t demotivate if it doesn’t work at first, I have make a special video for set up the clock
Here is the video to set up correctly the clock, don’t hesitate to comment on the video or by contacting me if you have trouble to runs your clock (with a video if possible to see it in functioning) :
Photo Sequence Instructions
The photo sequence have been taken in correct order, don’t forget to check the correct positioning of the pallet and pawl. GalileoClockFreeInstructions (zip, 18mo)